内蒙古快3

Shenzhen Jun Tai Feng Novel Material co., ltd
服务热线:

内蒙古快30755-29694891

0755-29694892

Banner
Translucent Glass Silica Gel
products


Shenzhen Jun Tai Feng novel material co。, ltd

Tel: 0755-29694891 0755-29694892

Fax: 0755-29694893

Email: szjtf001@126。com

URL: www。juntaifeng。com

Address: Shenzhen Bright new District, public-ming potato field PO Community Emerging Industrial Zone A, the first second floor 201


Translucent Glass Silica Gel
Translucent Glass Silica Gel

Translucent Glass Silica gel is suitable for the spherical bulb lamp and other materials (such as aluminum, ceramics, glass) positioning bonding and light strip groove plug.


First, use:

Translucent Glass Silica Gel is for the development of a bulb lamp is mainly used for spherical bulb lamp positioning adhesive Special glue, in addition, because of its high-strength, high adhesion and fast curing characteristics, but also widely used in a variety of materials (such as aluminum, ceramics, glass, PE, etc。) the positioning of the bonding and light strip groove plug。


Second, function and characteristics:

jtf-107d Single Group Organic SiliconeMainly used for the positioning of the bulb lamp bonding and the light stripe Groove plug Its main functions are as follows:

1, it has excellent waterproof nature, can protect the lighting not by water immersion;

2, with excellent adhesion, you can ensure that the use of lighting in the process will not be caused by the external force and the bonding part of the cracking;

3, with fast curing time characteristics, can be quickly cured, shorten the production cycle;

4, with super Anti-ultraviolet and weatherability ability, can be in a very wide temperature range ( -40-----220 ℃) Normal use, to ensure that the colloid in the lighting service life will never become brittle;

5, in addition, this section of glue can also be used for lamp-sleeve Groove plug;

6, the product is a single group of room temperature curing, the main curing mechanism is with the air in the water reaction and curing, so the temperature is not sensitive, easy to operate and concise.


Third, technical specifications:


Four, the use of methods:

1, when used for spherical bulb lamp adhesion, direct extrusion to the need to adhere to the place can be, two minutes after the next operation;

2, when used for other materials positioning bonding, glue extrusion to the need to adhere to the site, with flat chips or other flat objects will glue scraping map evenly, two minutes after the bonding, bonding needs to exert a certain pressure;

3, for plugging the head, the direct extrusion to the head of the block can be.

 

Five, security:

1, this series products for pure silicone products, does not contain any harmful substances, is environmentally friendly products, even if the human body direct contact will not have any adverse reactions;

2, this series of products is not flammable product, will not produce volatile substances, no risk of explosion;

3, this series of products in the curing process will not produce any harmful substances, the environment and no harm to the human body.


Six, Attention matters:

1, this glue can not be mixed with other glue;

2, glue extrusion, to wait for its gel (generally two minutes or so) after the subsequent operation;

3, unused glue need to be sealed to save, as long as the glue gel can be used;

4, such as the previous use of plastic and the plastic time interval is very large, the container can be located in the position of the glue may be solidified, this is a normal phenomenon, will be solidified part of the glue can continue to use;

5, at room temperature in a cool place sealed preservation;

6, because this product is chemical products, your specific production process is not the Division I can control, so before using the sample, suitable, please rest assured use.

上海天天彩选4 山东十一运夺金 山东十一运夺金 内蒙古11选5 内蒙古快3 幸运飞艇APP 山东十一运夺金 内蒙古11选5 深圳风彩 上海天天彩选4